Technical Parameter of FD8.0-10000 10KW Wind Turbine
Numbers of Blade |
3 Pcs |
Material of Blade |
FRP Complex Resin |
Diameter of Wind Rotor |
6.4m |
Start (out-in) wind speed |
3m/s |
Working wind speed |
3-31m/s |
Rated speed |
180 rpm |
Security wind speed |
45m/s |
Wind energy ratio |
40% |
Generator |
Three phase
Permanent magnet generator |
Generator rated power |
10000w |
Max output power |
1400w |
Charging voltage |
240Vdc |
Output voltage of Inverter |
Single phase 220-240Vac/50HZ
110-130Vac /60HZ
Three Phase 380-415Vac/60HZ |
Stop method |
By Controller auto-brake or Manual |
Wind direction tracking method |
By dogvane and controller auto-adjustment |
Speed adjustment method |
By anemoscope and serve motor |
Protect method |
Intelligent control full-automatically |
Tower type |
Galvanized Tapered tower |
Tower height & weight |
12m/ 1450kgs |
Charging control |
Intelligent control full-automatically |
Inverter power supply |
Pure sine wave |
Battery Matching (for off-grid wind system) |
20-30pcs 12Vdc-200AH Lead-acid or colloid batteries |
Grid tied inverter matching
(For on-grid wind system) |
Input: 240Vdc
Output: 240Vac single phase or 380-415Vac Three phase
Recommend : SMA WB6000A (two pcs)
Sungrow WG20K (One pcs) |
Time of charging (off-grid type) |
About 18 hours |
Annual power generation |
About 25000 KWH ( annual average wind speed above 7.5m/s ) |
Packing details |
|
Total packages |
5pkgs |
Total N.W / G.W |
2360kgs / 2500kgs |
Total Volume |
7.5CBM |